25KW Induction Heating System with Temperature-Controller up to 1700℃

• Working Voltage: 220V AC, 50/ 60Hz, Three Phases (380VAC, 3phase available upon request)

• Working Current: 10~86 Amps (100A breaker required)

• Max. Input Power: 25 KW 

• Output Frequency: 30 - 80 kHz 

• Duty Cycle: 100%

• Induction Coil: 150mm(OD) x 140mm(ID) x 65mm(H) 

• Air Cooling: Rear Fan

• Protection: Automatic water pressure, over-temperature, and overpower protection

• Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover

• Precision digital temperature controller with Automatic PID tuning

• 30 segments programmable for controlling heating and cooling rate as well as dwell time.

• Overheating & thermocouple failure protection.

• +/- 3℃ temperature accuracy. 

• Thermocouple: C type ( 1/4"x10"L )

• Continuous Working Temp. Range: 1000℃~1700℃

• Max. Working Temperature: 1800℃ (for less than an hour)

• Optional: Eurothermo Controller with +/- 0.5℃ accuracy at the extra cost

• High Purity Graphite Crucible: 6" O.D x 5" ID x        6"H, is included for induction heating.

• Three-layer special design refractory liner can withstand temperature up to 1800℃.

• Note: Graphite crucible is consumable, please click order spare at CYKY

Sealing Flanges & Quartz Chamber

• Two-end Open Quartz Tube is included with dimensions of  11"OD x 10.6"IDx 20” H

• Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting.

• Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port.

• KF25 right angle valve& clamps and 1000mm long SS bellows are included for connecting to vacuum pump

• Built-in 0.3 Bar pressure release valve to protect over-pressure accident.

Pressure Sensor

• Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torr

• One 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.

Flow Meter

• Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPT

• Accuracy: 4%

• Optional:  Precision MFC is available upon request at the extra cost

Water Chiller

• Temperature range: 5 - 30℃

• Water Flow Rate: 58 L/m

• Note: It is recommended to use specific coolant to get the best performance.

Vacuum Pump

• One 156 L/m Rotary Vane Vacuum Pump is included

• Rate: 156 L/min up to 10E-2 torr vacuum.

• Max. Power Consumption: 0.4KW / 0.37KW

• For US customer, 110V Vacuum pump will be included

• If you choose high-speed turbo-pump, vacuum level can reach 10E-5 torr 

Heavy Duty Mobile Cart

• Structure: Steel Frame Mobile Cart

• 600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange

Protective Sheild

• For Non-UL Certified version, a protective shield made of phenolic sheets will be provided.

• For UL Certified version, a clear protective shield made of polycarbonate will be provided.

• The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen.

Warranty

• One year limited warranty with lifetime support

• Consumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty

Net Weight

350 lbs